Old - Motorcycle - Parts

Germany

   - Shock absorbers  BMW R50/2 - R51/2 - R51/3 - R67 - R67/2 - R67/3 -              R68                 


We offer completely new shock absorbers for BMW R50/2, R51/2, R51/3, R67, R67/2, R67/3, R68.

The outside dimensions are the same as for the original shock absorbers. The shock absorbers have a different inner

construction than the original. The shock absorbers are equipped with a special oil damping valve.

A better roadside  guaranteed. The shock absorbers cannot be distinguished from the original from the outside.

The dip tubes are made of 40H steel and hardened to a hardness of 30HRC.

The material and the production are much better compared to the original immersion tubes which were very soft

under the Rockwell scale.


Oil quantity per fork 130ml. fork oil


Assembly:

We ask for the two sheet metal sleeves, where the ones with the fork brackets Screwed (thread), with Loctite 542.

It is very important, since the sheet metal sleeves are not the best quality and it can occur that start to lick

The shaft seal should also be checked if these are exactly in the sheet metal sleeves sit.

These must not move freely in the sheet metal sleeves, since oil can leak there as well. Before starting the first shock

 absorber assembly, do not immediately tighten everything.

You should before the first drive the bolts of the fender, under the bridge and of the axle slightly so that the shock

absorbers can sit.

Only after the first drive you can tighten all the screws.















---------------------------------------------------------------------------------------------------------------------------------------

Price:

Schock absorber for BMW R50/2, R51/2, R51/3, R67, R67/2, R67/3, R68

Part number: 00 2132 47B 68  - 730,00 € 

 
Anrufen
Email